|
Radiation Safety Training
Once the radiation safety training manual has been
studied and you are ready to complete the training with
a written examination, contact the radiological control
office to set up an examination time and date at 536-2015
or
radcon@cehs.siu.edu.
The purpose of this program is to provide a minimum level
of knowledge for those faculty, staff, and students who will
be handling radionuclides or operating equipment that produces
ionizing radiations. It is the basic intent that this shall be
a self-study course.
This course is designed to meet the requirements for
training as promulgated by the Illinois Department of Nuclear
Safety.
For the purpose of the training program, personnel who
work with radiochemicals or in areas where radiochemicals
are in use have been divided into four categories.
Category 1. Radiological Laboratory Supervisors (RLS) : As
defined in the handbook of Radiological Operations, page 15.
Category 2. Supervised Users: All personnel who use
radiochemicals under the supervision of an RLS, e.g. graduate
students, post-doctoral students, technicians and student
workers.
A persons authorization to use radionuclides will begin
after he/she has successfully completed the certification
examination. Training requirements also include an annual
refresher course, which is supervised by the Radiological
Laboratory Supervisor. The annual refresher training is
documented on form RCC-14 and must be certified with the
signature of the RLS. Minimum passing scores shall be:
Category 1-90%; Category 2- 80%.
The references cited in the radiation safety training manual
are:
HRO-Handbook of Radiological Operations, Southern Illinois
University-Carbondale, 1984 Edition. (A copy is on file at the
Center for Environmental Health and Safety)
|